The ice cream machine is a convenient tool for making ice cream. Various situations may occur when using the ice cream machine. Our company will explain to you the solution to the problem of the freezing cylinder of the ice cream machine. The main phenomenon of the freezing cylinder of the ice cream machine is that the material cannot be discharged, and there will be abnormal "clicking" friction sounds inside the machine. At this time, unplug the power in time and wait 1-2 hours for the ice inside to melt before turning it on again. If there is a relatively large amount of residual water that has not been released, it is easy to freeze the tank if you add materials directly.
The main solutions are as follows:
Tighten the nut: If the sealing of the ice cream machine is not good, causing ice crystals to freeze in the blender, you can try to tighten the nut to increase the sealing.
Replace the mixer sealing ring: If the mixer sealing ring is damaged, it may also cause ice crystals to freeze in the mixer. At this time, you can try to replace the mixer sealing ring.
Call the after-sales hotline: If none of the above methods can solve the problem, it is recommended to call the after-sales hotline of the ice cream machine to seek professional technical support.
In addition, if the output of the ice cream machine is low, the freezing cylinder phenomenon is also prone to occur. At this time, you can try to squeeze out a few ice creams at the outlet with low output to keep the output on both sides consistent.
In the process of using the ice cream machine, you also need to pay attention to some usage habits. For example, when cleaning, you must completely drain out the water. If there is a lot of residual water that has not been drained out, it will be easy to freeze the cylinder if you add ingredients directly. Add ingredients to make Also, press the cleaning button for 2-4 minutes to allow the slurry to fill the freezing cylinder and then press the cooling button.
The above are the main methods to solve the problem of freezing cylinder of ice cream machine. If none of the above methods can solve the problem, it is recommended to contact the after-sales service of the ice cream machine for professional technical support.